Effective mid-October 2022, or when supplies run out, Noble Company will no longer sell or provide the 5-oz tubes of NobleSealant 250. Moving forward, NobleSealant 250 will only be available in the 10.3-oz tubes. In addition, the 10.3-oz tubes will now be part of the FreeStyle Linear Drain™ assembly.
Noble Company’s NEW “FireFighter® ELIMINATOR 1330™” is a high-performance antifreeze for fire sprinkler systems that provides a corrosion inhibitor and microbiological protection. FireFighter Eliminator 1330 is UL listed and is compatible with all kinds of sprinkler pipe.
CLICK HERE TO LEARN MORE
Noble Company will implement a running change to the edges of our Solid Curbs. Effective immediately, Noble Solid Curbs will now be manufactured without the corner radius. Refer to the illustrations below. This does not affect the performance of the curb or the installation.
Effective February 1, 2021, Noble Company will make a running change to the drain base height of its FreeStyle Linear Drain.
Currently, the height of the drain base ranges from 1¼” high for a 24” drain, to 1⅝” high for a 60” drain. Going forward, all drain bases will have a height of 1¼”.
This change will provide for consistency across all drains and the ability to standardize on floor heights when using different drain lengths, all while maintaining an internal slope to drain to rid the system of waste water.
The BEST just got BETTER!
Noble Company is excited to announce that the ProBase® II Multi-Slope™ is now available PRE-WATERPROOFED!
ProBase II Multi-Slope Base (kit and ala-carte) is now available with ValueSeal waterproofing pre-applied, reducing installation time and increasing flexibility.
The base is designed to provide a smooth transition to Noble Company’s Freestyle Thin-Bed Drain™.
Noble Company is excited to introduce a new shower base and kit; ProBase® II Multi-Slope.
The ProBase® II Multi-Slope provides quick and easy installation (with modified thin-set mortar or NobleBond EXT) to provide the code-required slope to drain. The base is designed to provide a smooth transition to Noble Company’s Freestyle Thin-Bed™ Drain. The pre-sloped bases are available in 6 standard sizes (end drain and center drain), and custom sizes are available upon request.
Kit includes Pre-Sloped Base, ValueSeal Waterproofing Sheet Membrane, Solid Curbs, Thin-Line Installation…
Noble Company is excited to introduce a new Low-VOC Waterproofing Sealant and Seamer; NobleSealant 250.
NobleSealant 250 is a thermosetting elastomeric hybrid polymer that is unaffected by water when cured. This material is a moisture cure product that can allow for flood testing in 30 minutes to 4 hours depending on environmental conditions. NobleSealant 250 is available in 10.3 oz or 5 oz tubes.
Please contact the Noble Company or your local Independent Noble Representative for more information.
Noble Company is excited to introduce a new finish for the FreeStyle Thin-Bed Drain™; "Flat Black" finish is available in both PVC and ABS bases (#865 and #965).
The FreeStyle Thin-Bed Drain™ is a low-profile dependable drain that can adapt to Noble’s ProBase® II Multi-Slope base or can be used with low-profile mud beds. The stainless steel clamping ring provides for the integration of sheet membrane to drain for a watertight connection.
Please contact the Noble Company or your local Independent Noble Representative for more information.
Noble Company is pleased to introduce an expansion of its patented NobleFlex® Drain Flashing with the launch of NobleFlex SD Drain Flashing (Solid Divot). This new product provides for a compact base to screed mortar to. It can be used with most existing clamping ring drains and provides flexibility to accommodate even the most challenging drain location.
The 3” flange around the outer edge of the flashing offers a bonding surface for the waterproof membrane to integrate into the system.
Please contact the Noble Company or your local Independent Noble Representative for more…
No longer worry and overthink membrane layout to ensure the bare edge is not visible.
NobleSealant 150, the universal low VOC seaming agent, or modified thin-set can be used on all Noble membranes (with fabric) to provide a watertight seam during installation. Do not use NobleWeld 100 for seaming and bonding on membranes with fabric.